What is the Product # for replacement nipples used for the self-flush valve on the Lachat Series III Eluent Pump?

Document ID

Document ID TE8535

Version

Version 3.0

Status

Status Published

Published Date

Published Date 06/04/2019
Question
What is the Product # for replacement nipples used for the self-flush valve on the Lachat Series III Eluent Pump?
Summary
Replacement nipples on Series III Eluent Pump
 
Answer
There are two Product # that can be considered to replace the nipples used for the self-flush valve on the Lachat Series III Eluent Pump (Product # A28106):
 
Product # 28226 NIPPLE, BARBED, 10/32 X 1/8 ID
Product # 28234 NIPPLE, BARBED, 10/32 X 1/16 ID
 
The ID of the nipple that should be used depends on the tubing size that is being used. Older versions of the pump used a smaller tubing (1/16 ID) while newer versions transitioned to larger tubing (1/8 ID). Either nipple is compatible with all versions of the pump as the threaded side of the nipple is the same with both options.
 

Was this answer helpful?

Submitting...
Thank you for your feedback!
There was an error with your submission. Please try again.