What are the instructions for displaying mV for a pH probe on the SL1000 Portable Parallel Analyzer™?

Document ID

Document ID TE8068

Version

Version 2.0

Status

Status Published

Published Date

Published Date 08/28/2018
Question
What are the instructions for displaying mV for a pH probe on the SL1000 Portable Parallel Analyzer™?
Summary
Instructions for displaying mV on SL1000
Answer
The SL1000 Portable Parallel Analyzer™ (PPA) is capable of displaying mV values for a pH probe. The instructions to display the mV are as follows:

1. Select the 'Main Menu' button
2. Select "Settings"
3. Select "Probe"
4. Select "pH Options"
5. Select "Measurement Options"
6. Select "Display Configuration"
7. The following screen with 'Temp' and 'pH' at the top of the screen, and mV on the bottom may appear:
8. Press the down arrow key until mV is highlighted (in blue), and then press the right arrow key to select it (a dark, bold border will appear around the mV box to indicate it's been selected).
9. Once mV is selected, press the up arrow key to move mV up with the pH and Temp options. 
   
10. Once these changes are made, press OK, and then Exit. Now when taking a pH reading, both a pH value and mV value displayed on the screen.

Was this answer helpful?

Submitting...
Thank you for your feedback!
There was an error with your submission. Please try again.