When should an air purge system be used and what is required to add it to a 5500/961X Silica/Phosphate Analyzer?

Document ID

Document ID TE6010

Published Date

Published Date 09/24/2021
Print
Question
When should an air purge system be used and what is required to add it to a 5500/961X Silica/Phosphate Analyzer?
Summary
Information on air purge kit for 5500 or 961X Silica or Phosphate Analyzer
Answer
In the event a 5500/961X Silica/Phosphate analyzer is installed in an environment with corrosive gases or high humidity causing condensation inside the case, it would be recommended to add the air purge kit to pressurize the inside of the analyzer cabinet. Attached is the instruction sheet for this air purge system.

Product # 6789300 is required for the 5500/961X Silica/Phosphate air purge kit. The air purge kit is listed in the replacement parts list of the 5500sc Analyzer Maintenance and Troubleshooting Manual on page 15 as a "Fan Filter Plug."

Once the air purge kit is installed the air purge option in the system setup menu for the analyzer (Menu > System Setup > Air Purge) must be turned to 'ON'
Attachments

Was this answer helpful?

Submitting...
Thank you for your feedback!
There was an error with your submission. Please try again.