Which cellular provider(s) can be used with the Mobile Sensor Management (MSM) products

Document ID

Document ID TE5809

Version

Version 6.0

Status

Status Published

Published Date

Published Date 10/02/2018
Question
Which cellular provider(s) can be used with the Mobile Sensor Management (MSM) products
Summary
Mobile Sensor Management Cellular provider(s)

- AT&T
- T-Mobile
- Rogers Network (Canada)

- Verizon 3G was added with the release 1.5 in December, 2017
Answer
The Mobile Sensor Management (MSM) products using cellular services are compatible with the following carriers:

Update: Rogers Network has been proven to work in Canada
             Support for Verizon 3G was added with the release 1.5 in December 2017 (there is a specific CDMA modem required - Product # LZY995 which does not use a SIM card)

Prior to startup, the following information will be needed from the cellular provider for each sc1500 probe module or DR3900/DR6000 spectrophotometer that will be using cellular connectivity:

Access Point Name (APN):
Username: (may not be required by the carrier, if not provided leave this blank in the configuration pages)
Password: (may not be required by the carrier, if not provided leave this blank in the configuration pages)
SIM card PIN number (leave field empty if this is not required):
Mobile phone number assigned to the service:

The cellular provider information above will need to be paired with the USB modem kit (Product #LZY971, or LZY995) used with each sc1500 probe module or DR3900/DR6000 spectrophotometer that will be using cellular connectivity.  The cellular carrier may require the following information from each modem modem kit:

GSM/GPRS carriers (LZY971 modem) MultiTech modem IMEI number (located on the modem and it's packaging material):
CDMA Verizon 3G modem (Product # LZY995) MultiTech modem MEID number (located on the modem and it's packaging material):

Was this answer helpful?

Submitting...
Thank you for your feedback!
There was an error with your submission. Please try again.