Which parts do I need to re-build the flow cell (Bypass Panel) on the Nitratax sc sensor?

Document ID

Document ID TE2273

Published Date

Published Date 06/08/2018
Print
Question
Which parts do I need to re-build the flow cell (Bypass Panel) on the Nitratax sc sensor?
Summary
Nitratax sc and flow cell rebuild
Answer
Nitratax Plus sc Bypass panel (flow cell) replacement parts:
PN LZX428 - Seals for flow unit, O-ring 70.00 x 5.00 - EPDM 70
PN LZY228 - Pressure ring 1 without thread
PN LZY229 - Pressure ring 2 with thread
PN LZX923 - Screws for flow unit M6x90, set of 4
PN LZY371 - Screwed insert G1/4"
PN LZP538 - Angled screwed insert
PN LZY230 - Seal cap

Nitratax Clear sc Bypass panel (flow cell) replacement parts:
PN LZX572 - Set of seals for Nitratax clear flow unit
PN LZY379 - Pressure ring 1
PN LZY329 - Pressure ring 2
PN LZY371 - Screwed insert G1/4"
PN LZP538 - Angled screwed insert
PN LZY230 - Seal cap

* Nitratax sensor internal seals are service only parts so if the sensor is giving a REPLACE GASKETS or SEALS warining, the sensor must be serviced by a qualified Hach Service Technician

Was this answer helpful?

Submitting...
Thank you for your feedback!
There was an error with your submission. Please try again.