Why would a 100% Transmittance (T) using the Low Range COD reagents be seen?
100% transmittance when using COD reagents
Generally this happens when a user curve has been made and has set the blank on the LOW RANGE to read 100% T. The blank is supposed to be set on most spectrophotometers to read at 35% T. Keep in mind, if there is COD present, the reagent reacts with it and changes from yellow to green. The higher the COD, the lighter in yellow color the sample will be and the higher the %T. Because the COD of the sample causes a loss of yellow color, the meter scale is reversed; low range reagents measure the amount of yellow color remaining rather than the amount of green color produced..